Synthesis and Characterization of All-Acrylic Tetrablock Copolymer Nanoparticles: Waterborne Thermoplastic Elastomers via One-Pot RAFT Aqueous Emulsion Polymerization.

Reversible addition-fragmentation chain transfer (RAFT) aqueous emulsion polymerization is used to prepare well-defined ABCB tetrablock copolymer nanoparticles via sequential monomer addition at 30 °C. The A block comprises water-soluble poly(2-(N-acryloyloxy)ethyl pyrrolidone) (PNAEP), while the B and C blocks comprise poly(t-butyl acrylate) (PtBA) and poly(n-butyl acrylate) (PnBA), respectively. High conversions are achieved at each stage, and the final sterically stabilized spherical nanoparticles can be obtained at 20% w/w solids at pH 3 and at up to 40% w/w solids at pH 7. A relatively long PnBA block is targeted to ensure that the final tetrablock copolymer nanoparticles form highly transparent films on drying such aqueous dispersions at ambient temperature. The kinetics of polymerization and particle growth are studied using 1H nuclear magnetic resonance spectroscopy, dynamic light scattering, and transmission electron microscopy, while gel permeation chromatography analysis confirmed a high blocking efficiency for each stage of the polymerization. Differential scanning calorimetry and small-angle X-ray scattering studies confirm microphase separation between the hard PtBA and soft PnBA blocks, and preliminary mechanical property measurements indicate that such tetrablock copolymer films exhibit promising thermoplastic elastomeric behavior. Finally, it is emphasized that targeting an overall degree of polymerization of more than 1000 for such tetrablock copolymers mitigates the cost, color, and malodor conferred by the RAFT agent.

Synthesis of Poly(propylene oxide)-Poly(N,N'-dimethylacrylamide) Diblock Copolymer Nanoparticles via Reverse Sequence Polymerization-Induced Self-Assembly in Aqueous Solution.

Sterically-stabilized diblock copolymer nanoparticles comprising poly(propylene oxide) (PPO) cores are prepared via reverse sequence polymerization-induced self-assembly (PISA) in aqueous solution. N,N'-Dimethylacrylamide (DMAC) acts as a cosolvent for the weakly hydrophobic trithiocarbonate-capped PPO precursor. Reversible addition-fragmentation chain transfer (RAFT) polymerization of DMAC is initially conducted at 80% w/w solids with deoxygenated water. At 30-60% DMAC conversion, the reaction mixture is diluted to 5-25% w/w solids. The PPO chains become less solvated as the DMAC monomer is consumed, which drives in situ self-assembly to form aqueous dispersions of PPO-core nanoparticles of 120-190 nm diameter at 20 °C. Such RAFT polymerizations are well-controlled (Mw/Mn ≤ 1.31), and more than 99% DMAC conversion is achieved. The resulting nanoparticles exhibit thermoresponsive character: dynamic light scattering and transmission electron microscopy studies indicate the formation of more compact spherical nanoparticles of approximately 33 nm diameter on heating to 70 °C. Furthermore, 15-25% w/w aqueous dispersions of such nanoparticles formed micellar gels that undergo thermoreversible (de)gelation on cooling to 5 °C.

Efficient Synthesis of Hydrolytically Degradable Block Copolymer Nanoparticles via Reverse Sequence Polymerization-Induced Self-Assembly in Aqueous Media.

Hydrolytically degradable block copolymer nanoparticles are prepared via reverse sequence polymerization-induced self-assembly (PISA) in aqueous media. This efficient protocol involves the reversible addition-fragmentation chain transfer (RAFT) polymerization of N,N'-dimethylacrylamide (DMAC) using a monofunctional or bifunctional trithiocarbonate-capped poly(ϵ-caprolactone) (PCL) precursor. DMAC monomer is employed as a co-solvent to solubilize the hydrophobic PCL chains. At an intermediate DMAC conversion of 20-60 %, the reaction mixture is diluted with water to 10-25 % w/w solids. The growing amphiphilic block copolymer chains undergo nucleation to form sterically-stabilized PCL-core nanoparticles with PDMAC coronas. 1 H NMR studies confirm more than 99 % DMAC conversion while gel permeation chromatography (GPC) studies indicate well-controlled RAFT polymerizations (Mw /Mn ≤1.30). Transmission electron microscopy (TEM) and dynamic light scattering (DLS) indicate spheres of 20-120 nm diameter. As expected, hydrolytic degradation occurs within days at 37 °C in either acidic or alkaline solution. Degradation is also observed in phosphate-buffered saline (PBS) (pH 7.4) at 37 °C. However, no degradation is detected over a three-month period when these nanoparticles are stored at 20 °C in deionized water (pH 6.7). Finally, PDMAC30 -PCL16 -PDMAC30 nanoparticles are briefly evaluated as a dispersant for an agrochemical formulation based on a broad-spectrum fungicide (azoxystrobin).

Synthesis and Characterization of Charge-Stabilized Poly(4-hydroxybutyl acrylate) Latex by RAFT Aqueous Dispersion Polymerization: A New Precursor for Reverse Sequence Polymerization-Induced Self-Assembly.

The reversible addition-fragmentation chain transfer (RAFT) aqueous dispersion polymerization of 4-hydroxybutyl acrylate (HBA) is conducted using a water-soluble RAFT agent bearing a carboxylic acid group. This confers charge stabilization when such syntheses are conducted at pH 8, which leads to the formation of polydisperse anionic PHBA latex particles of approximately 200 nm diameter. The weakly hydrophobic nature of the PHBA chains confers stimulus-responsive behavior on such latexes, which are characterized by transmission electron microscopy, dynamic light scattering, aqueous electrophoresis, and 1H NMR spectroscopy. Addition of a suitable water-miscible hydrophilic monomer such as 2-(N-(acryloyloxy)ethyl pyrrolidone) (NAEP) leads to in situ molecular dissolution of the PHBA latex, with subsequent RAFT polymerization leading to the formation of sterically stabilized PHBA-PNAEP diblock copolymer nanoparticles of approximately 57 nm diameter. Such formulations constitute a new approach to reverse sequence polymerization-induced self-assembly, whereby the hydrophobic block is prepared first in aqueous media.

Understanding the Interaction of Gluconamides and Gluconates with Amino Acids in Hair Care.

A hair care mixture formed from a gluconamide derivative and 3-hydroxypropyl ammonium gluconate is known to strengthen hair fibers; however, the mechanism by which the mixture affects hair is unknown. To give insight into the aggregation of the target gluconamide and potential interactions between the gluconate-derived mixture and hair fibers, a range of systems were characterized by X-ray crystallography namely two polymorphic forms of the target gluconamide and three salts of 3-hydroxypropylammonium with sulfuric acid, methane sulfonic acid, and oxalic acid. The gluconamide proves to aggregate and becomes a supramolecular gelator in aniline and benzyl alcohol solution. The resulting gels were characterized by rheology, scanning electron microscopy, proton nuclear magnetic resonance, Fourier transform infrared spectroscopy, and powder X-ray diffraction.

Prediction and Preparation of Coamorphous Phases of a Bislactam.

The effectiveness of a partial least squares-discriminant analysis coamorphous prediction model was tested using coamorphous screening data for a promising coamorphous former, the dimer of N-vinyl(caprolactam) (bisVCap) with a range of active pharmaceutical ingredients. The prediction model predicted 71% of the systems correctly. An experimental coamorphous screen was performed with this coformer with 13 different active pharmaceutical ingredients, and the results were compared to the predictions from the model. A total of 85% of the systems were correctly predicted. Stability assessments of three coamorphous systems showed that the prediction model score did not strongly correlate with the stability of the coamorphous material. The model performed well with small-molecule coformers, such as bisVCap, despite the difference in structure and properties compared to the amino-acid-based model training set.

Structure and hydration of polyvinylpyrrolidone-hydrogen peroxide.

The structure of the commercially important polyvinylpyrrolidone-hydrogen peroxide complex can be understood by reference to the co-crystal structure of a hydrogen peroxide complex and its mixed hydrates of a two-monomer unit model compound, bisVP·2H2O2. The mixed hydrates involve selective water substitution into one of the two independent hydrogen peroxide binding sites.

Alkali Metal Salts of 10,12-Pentacosadiynoic Acid and Their Dosimetry Applications.

Wide-dose-range 2D radiochromic films for radiotherapy, such as GAFchromic EBT, are based on the lithium salt of 10,12-pentacosadiynoic acid (Li-PCDA) as the photosensitive component. We show that there are two solid forms of Li-PCDA-a monohydrated form A and an anhydrous form B. The form used in commercial GAFchromic films is form A due to its short needle-shaped crystals, which provide favorable coating properties. Form B provides an enhanced photoresponse compared to that of form A, but adopts a long needle crystal morphology, which is difficult to process. The two forms were characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, CP-MAS 13C solid-state NMR spectroscopy, and thermogravimetric analysis. In sum, these data suggest a chelating bridging bidentate coordination mode for the lithium ions. The sodium salt of PCDA (Na-PCDA) is also reported, which is an ionic cocrystal with a formula of Na+PCDA-·3PCDA. The PCDA and PCDA- ligands display monodentate and bridging bidentate coordination to the sodium ion in contrast to the coordination sphere of the Li-PCDA forms. In contrast to its lithium analogues, Na-PCDA is photostable.

Predictive identification of co-formers in co-amorphous systems.

This work aims to understand the properties of co-formers that form co-amorphous pharmaceutical materials and to predict co-amorphous system formation. A partial least square - discriminant analysis (PLS-DA) was performed using known co-amorphous systems described by 36 variables based on the properties of the co-former and the binding energy of the system. The PLS-DA investigated the propensity to form co-amorphous material of the active pharmaceutical ingredients: mebendazole, carvedilol, indomethacin, simvastatin, carbamazepine and furosemide in combination with 20 amino acid co-formers. The variables that were found to favour the propensity to form co-amorphous systems appear to be a relatively large value for average molecular weight and the sum of the difference between hydrogen bond donors and hydrogen bond acceptors for both components, and a relatively small or negative value for excess enthalpy of mixing, excess enthalpy of hydrogen bonding and the difference in the Hansen parameter for hydrogen bonding of the coformer and the active pharmaceutical ingredient (API). To test the predictive power of this model, 29 potential co-formers were used to form either co-amorphous or crystalline two-component materials with mebendazole. Of these 29 two-component systems, the co-amorphous nature of a total of 26 materials was correctly predicted by the model, giving a predictive hit rate of 90 %.

The crystal engineering of radiation-sensitive diacetylene cocrystals and salts.

In this work we develop photoreactive cocrystals/salts of a commercially-important diacetylene, 10,12-pentacosadiynoic acid (PCDA, 1) and report the first X-ray crystal structures of PCDA based systems. The topochemical reactivity of the system is modified depending on the coformer used and correlates with the structural parameters. Crystallisation of 1 with 4,4'-azopyridine (2), 4,4'-bipyridyl (3), and trans-1,2-bis(4-pyridyl)ethylene (4) results in unreactive 2 : 1 cocrystals or a salt in the case of 4,4'-bipiperidine (5). However, salt formation with morpholine (6), diethylamine (7), and n-butylamine (8), results in highly photoreactive salts 12·7 and 1·8 whose reactivity can be explained using topochemical criteria. The salt 1·6 is also highly photoreactive and is compared to a model morpholinium butanoate salt. Resonance Raman spectroscopy reveals structural details of the photopolymer including its conformational disorder in comparison to less photoactive alkali metal salts and the extent of solid state conversion can be monitored by CP-MAS NMR spectroscopy. We also report an unusual catalysis in which amine evaporation from photopolymerised PCDA ammonium salts effectively acts as a catalyst for polymerisation of PCDA itself. The new photoreactive salts exhibit more reactivity but decreased conjugation compared to the commercial lithium salt and are of considerable practical potential in terms of tunable colours and greater range in UV, X-ray, and γ-ray dosimetry applications.

Structures of a Clathrate Hydrate Former, Inhibitor, and Synergist in Water.

SANS studies are reported for aqueous THF at the 1:17 clathrate hydrate-forming composition and on aqueous solutions of the synergist 2-butoxyethanol. Addition of the clathrate hydrate inhibitor polyvinylcaprolactam and a dimeric model compound, 1,3-bis(caprolactamyl)butane, show that the inhibitors do not significantly affect the solution structures of these two important species in clathrate hydrate formation and inhibition. The SANS studies show that 1,3-bis(caprolactamyl)butane is a good model for polyvinylcaprolactam, and both the polymer and model compound exhibit hydrogen bonding interactions with water but do not interact significantly with 2-butoxyethanol in aqueous solution.

Modulating the hydration behaviour of calcium chloride by lactam complexation.

Complexation of calcium chloride with bis(lactam) ligand L1 allows the formation of both an unstable anhydrous complex, an aqua complex {[Ca2(µ-L1)2(H2O)9]Cl4]}n (1) and a related hydrate incorporating additional lattice water of crystallization {[Ca(µ-L1)(H2O)5]Cl2·H2O}n (2). Related mono(lactam) L2 does not form aqua complexes but the anhydrous complex {[CaCl2(µ-L2)2]}n (3), is highly deliquescent. An unusual ethanol solvate is also reported {[CaCl2(L2)(EtOH)]}n (4).

RAFT Aqueous Dispersion Polymerization of N-(2-(Methacryloyloxy)ethyl)pyrrolidone: A Convenient Low Viscosity Route to High Molecular Weight Water-Soluble Copolymers.

RAFT solution polymerization of N-(2-(methacryoyloxy)ethyl)pyrrolidone (NMEP) in ethanol at 70 °C was conducted to produce a series of PNMEP homopolymers with mean degrees of polymerization (DP) varying from 31 to 467. Turbidimetry was used to assess their inverse temperature solubility behavior in dilute aqueous solution, with an LCST of approximately 55 °C being observed in the high molecular weight limit. Then a poly(glycerol monomethacylate) (PGMA) macro-CTA with a mean DP of 63 was chain-extended with NMEP using a RAFT aqueous dispersion polymerization formulation at 70 °C. The target PNMEP DP was systematically varied from 100 up to 6000 to generate a series of PGMA63-PNMEP x diblock copolymers. High conversions (≥92%) could be achieved when targeting up to x = 5000. GPC analysis confirmed high blocking efficiencies and a linear evolution in Mn with increasing PNMEP DP. A gradual increase in Mw/Mn was also observed when targeting higher DPs. However, this problem could be minimized (Mw/Mn < 1.50) by utilizing a higher purity grade of NMEP (98% vs 96%). This suggests that the broader molecular weight distributions observed at higher DPs are simply the result of a dimethacrylate impurity causing light branching, rather than an intrinsic side reaction such as chain transfer to polymer. Kinetic studies confirmed that the RAFT aqueous dispersion polymerization of NMEP was approximately four times faster than the RAFT solution polymerization of NMEP in ethanol when targeting the same DP in each case. This is perhaps surprising because both 1H NMR and SAXS studies indicate that the core-forming PNMEP chains remain relatively solvated at 70 °C in the latter formulation. Moreover, dissolution of the initial PGMA63-PNMEP x particles occurs on cooling from 70 to 20 °C as the PNMEP block passes through its LCST. Hence this RAFT aqueous dispersion polymerization formulation offers an efficient route to a high molecular weight water-soluble polymer in a rather convenient low-viscosity form. Finally, the relatively expensive PGMA macro-CTA was replaced with a poly(methacrylic acid) (PMAA) macro-CTA. High conversions were also achieved for PMAA85-PNMEP x diblock copolymers prepared via RAFT aqueous dispersion polymerization for x ≤ 4000. Again, better control was achieved when using the 98% purity NMEP monomer in such syntheses.

Preparation of an Antibacterial Poly(ionic liquid) Graft Copolymer of Hydroxyethyl Cellulose.

Poly(ionic liquid)s (P(IL)s) of different degrees of polymerization (10, 50, and 100) were prepared via RAFT polymerization using an alkyne-terminated xanthate as transfer agent, with a monomer conversion of up to ∼80% and a DM of 1.5 for P(IL)100. Subsequently, P(IL) chains were coupled to (15)N-labeled azido-functionalized hydroxyethyl cellulose (HEC), forming graft copolymers of HEC with different chain length and graft densities, which were characterized using ((13)C and (15)N) CP-MAS NMR and FT-IR spectroscopies. The antibacterial activities of HEC-g-P(IL)s were tested against Escherichia coli and Staphylococcus aureus and were comparable to ampicillin, a well-known antibiotic, demonstrating efficient activity of the graft copolymers against bacteria. Moreover, HEC-g-P(IL)s were slightly more effective against E. coli than S. aureus. A decrease in graft density of P(IL)10 on the HEC backbone decreased the activity of the graft copolymers against both bacteria. These findings suggest that HEC-g-P(IL) could find applications as an antiseptic compound, for example, in paint formulation.

The preparation of graft copolymers of cellulose and cellulose derivatives using ATRP under homogeneous reaction conditions.

In this comprehensive review, we report on the preparation of graft-copolymers of cellulose and cellulose derivatives using atom transfer radical polymerization (ATRP) under homogeneous conditions. The review is divided into four sections according to the cellulosic material that is graft-copolymerised; (i) cellulose, (ii) ethyl cellulose, (iii) hydroxypropyl cellulose and (iv) other cellulose derivatives. In each section, the grafted synthetic polymers are described as well as the methods used for ATRP macro-initiator formation and graft-copolymerisation. The physical properties of the graft-copolymers including their self-assembly in solution into nanostructures and their stimuli responsive behaviour are described. Potential applications of the self-assembled graft copolymers in areas such as nanocontainers for drug delivery are outlined.

N-alkyl pyrrolidone ether podands as versatile alkali metal ion chelants.

This work explores the coordination chemistry of a bis(pyrrolidone) ether ligand. Pyrrolidones are commercially important functional groups because of the high polarity and hence high hydrophilicity and surface affinity. An array of alkali metal ion complexes of a podand bearing two pendant pyrrolidone functionalities, namely 1-{2-[2-(2-oxo-pyrrolid-1-yl)-ethoxy]-ethyl}-pyrrolid-2-one (1) are reported. Reaction of this ligand with sodium hexafluorophosphate gives two discrete species of formulae [Na(1)2]PF6 (3) and [Na3(H2O)2(µ-1)2](PF6)3 (4), and a coordination polymer {[Na3(µ3-1)3(µ2-1)](PF6)3}n (5). The same reaction in methanol gives a 1 : 1 complex, namely [Na2(µ-1)2(MeOH)2](PF6)2 (6). Use of tetraphenyl borate as a less coordinating counter ion gives [Na2(1)2(H2O)4](BPh4)2 (7) and [Na2(1)4](BPh4)2 (8). Two potassium complexes have also been isolated, a monomer [K(1)2]PF6 (9) and a cyclic tetramer [K4(µ4-H2O)2(µ-1)4](PF6)4 (10). The structures illustrate the highly polar nature of the amide carbonyl moiety within bis(pyrrolidone) ethers with longer interactions to the ether oxygen atom. The zinc complex is also reported and {[ZnCl2(µ-1)]}n (11) exhibits bonding only to the carbonyl moieties. The ether oxygen atom is not necessary for Na(+) complexation as exemplified by the structure of the sodium complex of the analogue 1,3-bis(pyrrolid-2-on-1-yl)butane (2). Reaction of compound 1 with lithium salts results in isolation of the protonated ligand.

The chemistry of low dosage clathrate hydrate inhibitors.

This review aims to introduce the chemistry of low dosage inhibitors of clathrate hydrate formation within the context of their role in the oil and gas industry. The review covers both kinetic hydrate inhibitors and anti-agglomerants from the point of view of structure-function relationships, focussing on recent refinements in mechanistic understanding and chemical design, and the consequently evolving and increasingly fine-tuned properties of these fascinating compounds.

A simple chemical model for clathrate hydrate inhibition by polyvinylcaprolactam.

A dimeric model compound gives structural insight into the mode of interaction of low dosage hydrate inhibitors with water.

Absolute Rate Constants for alpha-Amide Radical Reactions.

The 1-(diethylcarbamoyl)-6,6-diphenyl-5-hexenyl radical (4a), the 1-(diethylcarbamoyl)-7,7-diphenyl-6-heptenyl radical (4b), and the 1-(diethylcarbamoyl)-1-methyl-6,6-diphenyl-5-hexenyl radical (4c) were produced from the corresponding PTOC esters (anhydrides of the carboxylic acid and N-hydroxypyridine-2-thione) by laser flash photolysis methods. The kinetics of cyclizations of radicals 4a and 4b were measured at various temperatures, and that of cyclization of 4c was measured at ambient temperature. Radicals 4a and 4b were employed as radical clocks in indirect kinetic studies to determine rate constants for reaction of secondary alpha-amide radicals with Bu(3)SnH. The calibrated tin hydride trapping reaction was then employed to determine rate constants for cyclization of the 1-(diethylcarbamoyl)-5-hexenyl radical (12). The rate constants for 5-exo cyclizations of secondary alpha-amide radicals are similar to those of their isostructural alkyl radical analogues. The rate constants for the 5-exo cyclization of tertiary alpha-amide radical 4c and the 6-exo cyclization of the secondary alpha-amide radical 4b are smaller than those of the analogous alkyl radicals and alpha-ester substituted radicals, apparently due to steric effects. The rate constants for tin hydride trapping of secondary alpha-amide radicals are similar to those for reactions with secondary alpha-ester radicals.